Skip to main content

ПРОГРАММЫ

Resize
Dock/Undock
NEW FAQ ADDED
X

MILLING
NPA 34/2021


The MILL-4-FEED Family Application Range Expands with New Inserts


HELIQUAD

Highlights

In response to the growing market demands,
ISCAR is expanding the MILL-4-FEED family of fast feed milling tools by adding the following new products:



FFQ4 SOMW... Insert Features
  • Flat chipformer available for insert sizes 09,12,17.
  • 1.6mm corner radius.
  • 4 indexable reinforced cutting edges.
  • Increased corner radius for improved performance in near-to-wall machining.
  • Produced from ISCAR’s advanced SUMOTEC carbide grade for assured high productivity.
  • The combination of advanced design with high-technology carbide grades results in significantly improved resistance to edge breakage and chipping, which provides better tool life and opens opportunities for increasing productivity in fast feed milling, especially cutting hard materials and machining continuous surfaces.


Marketing

We expect these new inserts will expand the application field of the MILL-4-FEED family and will provide ISCAR’s customers with a reliable solution for machining hard materials in fast feed milling with significant impact loading. The new inserts will promote the increase of ISCAR’S market share of milling products.



FFQ4 SOMT/W 0904

Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling


  • For side plunging, the initial cutting feed is 0.1 mm/t
  • T type for steel, ferritic and martensitic stainless steel, cast iron
  • RM-.. reinforced radius type for machining near straight shoulders wall
  • HP type for austenitic stainless steel and high temperature alloys
  • SOMW-T flat insert for interrupted and hard material up to 60 HRC






Averaged cutting data for FFQ4-09 fast feed cutters

* ISCAR material group in accordance with VDI 3323 standard
** For better performance it recommended to machine with a width of cut up to 0.4*DC For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%



FFQ4 SOMT/W 1205 Square Single-Sided Inserts

Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling


  • For side plunging, the initial cutting feed is 0.1 mm/t
  • T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
  • RM-.. type for interrupted cut and machining near straight shoulders wall
  • HP- for austenitic stainless steel and high temperature alloys
  • T20- for grey and nodular cast iron
  • SOMW-T flat insert for interrupted and hard material up to 60 HRC






Averaged cutting data for FFQ4-12 fast feed cutters

* ISCAR material group in accordance with VDI 3323 standard
** For better performance it recommended to machine with a width of cut up to 0.4*DC For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%



FFFQ4 SOMT/W 1706

Square Single-Sided Inserts with 4 Cutting Edges for Fast Feed Milling


  • For side plunging, the initial cutting feed is 0.1 mm/t
  • T type for steel, ferritic and martensitic stainless steel, cast iron and hardened steel
  • RM-.. type for interrupted cut and machining near straight shoulders wall
  • HP type for austenitic stainless steel and high temperature alloys
  • SOMW-T flat insert for interrupted and hard material up to 60 HRC






Averaged cutting data for FFQ4-17 fast feed cutters

* ISCAR material group in accordance with VDI 3323 standard ** For better performance it recommended to machine with a width of cut up to 0.4*DC For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%







The NPA32-2021's pdf file: View (PDF) or Download (ZIP)